J-Testr HV Relay Breakout Card
AboutThe HV Relay Breakout Card has separate ‘easy to use’ 2-way screw terminal blocks for all relays.
Safety clearances between all lines meet creepage distances of a minimum of 2.6mm or, where point to point distances do not allow 2.6mm, have 1mm air gaps. All relay contacts are clearly marked for easy of identification. A 1mm diameter hole test-point is provided for connection of the optional shield plane The HV Relay Breakout Card UserIO (GPIO) lines are taken to eight clearly marked 1mm diameter hole test-points. The card also contains 2 extra common grounding points. |