Partner Area
Eiger Design - Home of the J-Testr
  • _Home
  • _Systems
  • _Components
  • Support
  • Consultancy
  • Partners
  • Contact
  • Events
  • _Home
  • _Systems
  • _Components
  • Support
  • Consultancy
  • Partners
  • Contact
  • Events

J-Testr HVIO Breakout Card

About

The HVIO breakout card provides two connectors, one for ODD IOs and one for Even IOs, for each bank of Inputs and each back of Outputs.

The inputs are connected to a 10 way Hirose DP11 shrouded (2x5) Pin Headers with 2 grounds per connector. Each connector is clearly marked which bank it belongs to and if it is ODDs or EVENs inputs. IO numbers are also marked where location is possible.

The Outputs are connected to a 18 way Hirose DP11 shrouded (2x5) Pin Headers with each output and a ground connection having 2 pins for current draw reasons. Each connector is clearly marked which bank it belongs to and if it is ODDs or EVENs outputs. IO numbers are also marked at all locations.

​The HVIO Breakout card UserIO (GPIO) lines are taken to eight clearly marked 1mm diameter hole test-points. The card also contains 4 extra common grounding points.
Picture

​Schematic (PDF also available on download page)

Picture
Picture
Picture
Eiger Design GmbH  © Copyright 2020.
All rights reserved.