Partner Area
Eiger Design - Home of the J-Testr
  • _Home
  • _Systems
  • _Components
  • Support
  • Consultancy
  • Partners
  • Contact
  • Events
  • _Home
  • _Systems
  • _Components
  • Support
  • Consultancy
  • Partners
  • Contact
  • Events

Connection Card Information 

Picture
A Connection Card is used in a fixture based test system when using double ended 'Wireless' test probes as part of the 'EZ-Wired' concept.  

The Connection Card, which is sometimes referred to as a 'Pin Connection Board', is mounted underneath the fixture probe plate and is used to connect between the ‘wireless' probe receptacles and standard low-cost ribbon cabling. A Connection Card can also contain custom electronics, and/or J-Testr Modules, to add testing functions, such as multiplexing, local to the UUT. 

Using a Connection Card, as part of the 'EZ-Wired' concept, has many advantages over traditional wire-wrap wiring, the most prominent of which are the improvements in signal integrity and mechanical robustness.
  
Eiger Design GmbH can provide a full turnkey connection solution (including a Connection Card), or just a Connection Card, or​ the customer can easily design all items for themselves with the aid of example DXF files and/or 3D STEP files provided by Eiger Design..

​Below is some useful documentation regarding Connection Cards:


Picture
Eiger Design GmbH  © Copyright 2020.
All rights reserved.