Partner Area
Eiger Design - Home of the J-Testr
  • Home
  • Systems
  • J-Testr Core
  • Support
  • STANAG 4781
  • Consultancy
  • Partners
  • Contact
  • Events
  • Eiger Labs
  • EPickNPlace
  • Home
  • Systems
  • J-Testr Core
  • Support
  • STANAG 4781
  • Consultancy
  • Partners
  • Contact
  • Events
  • Eiger Labs
  • EPickNPlace

Accessories

Accessories designed to support our NextGen 'off the shelf' systems and J-Testr Core functional test products. Our accessories help support easier customization and help further expansion of customers chosen platform or can even be used as products in their own right.
​
Picture
Module Cards

Modules cards provide a convenient and simple way to add extra functionality to your test systems. These module come in the form of a piggy-back PCB that can be very simply mounted to any PCB to add extra functionality to the test system.

J-Testr Modules can be fitted to Interposers or Connection Cards or plateau cards as part of a J-Testr NextGen or J-Testr Core customization. 

Available modules are listed below <click for more information>:

4 Channel Power Monitor Module
​8 Channel Analogue Multiplexer Module
32 Channel Remote IO Module
​USB Switch Module
RS232 Module (w. FEASA Interface)
Picture

Picture
Picture
J-Mount UUT Mounting Solution

The J-Mount product provides an easy and quick mechanical mounting solution for a UUT during functional test, or during other activities that require the device to be held securely in place. The special 'sloped entry' design helps the UUT to be guided into place before being securely clamped.

​The J-Mount system consists of three main elements, an edge support clamp, an edge support and a centre support. The mounting system  is capable of holding all shapes and sizes of PCBs with thicknesses between 1mm and 2.5mm.
​
The J-Mount is a perfect 'low-cost' solution for all applications where a UUT or PCB needs to be held level and secure away from a possibly contaminated or conductive surface that could affect performance.

​Click here for more information


Fixtures

Eiger Design can supply professional designed custom fixtures to companies wishing to develop their own complete test system, have specific requirements, or to add fixturing to existing standalone J-Testr Core test systems.

Fixture mechanisms are available in 3 sizes as below:

Mini -> UUTs up to ​165mm x 110mm
Midi -> UUTs up to ​
285mm x 240mm
Max -> UUTs up to ​433mm x 288mm


All fixtures seamlessly integrate the J-Test Core inside (or underneath) and all provide exchangeable units for maximum convivences. Fixtures can be supplied with or without pylon mass interconnect interfaces  to the customers requirements.

Eiger Design GmbH offers a full Bed of Nails customization service to suit the specific requirement of a customer’s UUT device. 
Picture

Picture
Peripheral Breakout Cards
​
Peripheral breakout cards allow access to peripheral card edge connectors signals without the needing an Interposer. They are typical used by engineers/integrators  that are developing an interposer cards as they enable evaluating of individual peripheral cards before committing to the interposer design. ​Available breakouts are listed below:

Supply Breakout Card
Load Breakout Card
ADC/DAC Breakout Card
Timer Breakout Card
LVIO Breakout Card
HVIO Breakout Card
CARS Breakout Card
LV Relay Breakout Card
HV Relay Breakout Card

Picture
Eiger Design GmbH  © Copyright 2021.
All rights reserved.